LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fiesta Titanium, 4D Hatchback, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Seat System - Seats >> Disassembly And Assembly >> Seat Backrest - Front >> Disassembly

Seat Backrest - Front: Disassembly

NOTE: For component identification and locations, REFER to Seat - Exploded View, Front .
  1. Remove the front seat backrest. For additional information, REFER to Seat Backrest - Front .
  2. Remove the front seat backrest cover. For additional information, REFER to Seat Backrest Cover - Front .
  3. Detach the side air bag module wire harness retainer from the rear of the backrest frame.
  4. Remove the 2 side air bag module nuts.
  5. Remove the side air bag module in the following sequence:
    1. Pull the side air bag module mounting studs back through the backrest frame.
    2. Position the side air bag module away from the backrest frame.
    3. Route out the wire harness.
  6. Remove the backrest foam pad.
  7. Remove the anti-squeak bag from the backrest frame.
  8. Remove the 2 backrest foam retainer clips from the backrest frame.
  9. Remove the static lumbar support.
scientia non olet · About LEMON Manuals