Pinpoint Test RK: REDUCTANT Injector: Introduction

Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

• reductant injector
• reductant pump
• harness circuits: RDINJPWR and RDINJGND
• powertrain control module (PCM) (12A650)
  Fig 1: Identifying Reductant Injector Solenoid Connector

  Courtesy of FORD MOTOR CO.

Fig 2: Identifying Powertrain Control Module-T (PCM-T) Connector

Courtesy of FORD MOTOR CO.