2013 Hybrid: Description

The following procedure is designed to execute and complete the OBD monitors. To complete a specific monitor for repair verification, follow steps 1 through 4, then continue with the step described by the appropriate monitor found under the OBD Monitor Exercised column. For the EVAP monitor to run, the ambient air temperature must be between 4.4 to 37.8°C (40 to 100°F), and the altitude below 2,438 meters (8,000 feet). If the OBD monitors must be completed in these conditions, the powertrain control module (PCM) must detect them once (twice on some applications) before the EVAP monitor can be bypassed and OBD monitors readied. The EVAP bypassing procedure is described in the following drive cycle.

Use a scan tool to carry out the OBD drive cycle. Refer to the scan tool manufacturers instruction manual for each described function.