Selector Lever Cable: Installation
WARNING: This page is about a different car, the 2015 Ford C-Max. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Install the selector lever cable.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Install the selector lever cable grommet nuts and reposition the carpet.Torque
: 80 lb.in (9 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Connect the HVAC hose and reposition the carpet.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Install the instrument panel bracket and the bolts.
- 1.
Torque: 89 lb.in (10 Nm)
- 2.
Torque: 18 lb.ft (25 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Connect the selector lever cable to the selector lever and install the bolt.Torque
: 62 lb.in (7 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Connect the selector lever end to the selector lever.
 Courtesy of FORD MOTOR COMPANY
|
- 8.
Connect the selector lever cable to the retainer.
 Courtesy of FORD MOTOR COMPANY
|
- 9.
Position the exhaust heat shield and install the retainers.
 Courtesy of FORD MOTOR COMPANY
|
- 10.
Connect the selector lever cable to the retainers.
 Courtesy of FORD MOTOR COMPANY
|
- 11.
Position the brake fluid reservoir and install the bolts.Torque
: 89 lb.in (10 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 12.
Connect the selector lever cable to the bracket and install the bolt.Torque
: 62 lb.in (7 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 14.
Position the selector lever in D.
 Courtesy of FORD MOTOR COMPANY
|
- 15.
Position the transmission manual lever in D.
- 1.
Rotate the selector shaft lever clockwise until it stops.
- 2.
Rotate the selector shaft lever counterclockwise 3 detents.
 Courtesy of FORD MOTOR COMPANY
|
- 16.
Unlock the selector lever cable adjuster.
- 1.
Move the slide to the left.
- 2.
While holding the slide, position the adjuster lock upward.
 Courtesy of FORD MOTOR COMPANY
|
- 17.
Connect the selector lever cable to the transmission manual lever.
 Courtesy of FORD MOTOR COMPANY
|
 Courtesy of FORD MOTOR COMPANY
|
- 19.
Install the engine undershield and the retainers.
 Courtesy of FORD MOTOR COMPANY
|
- 20.
Verify that the vehicle only starts in PARK and NEUTRAL and the reverse lamps illuminate in REVERSE.