LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Engine Cooling System - 2.5L) >> Diagnosis And Testing >> Engine Cooling >> Pinpoint Tests >> The Engine Does Not Reach Normal Operating Temperature >> Possible Sources

Possible Sources

WARNING: This page is about a different car, the 2014 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
DTC FAULT TRIGGER CONDITION

DTC Description Fault Trigger Conditions
P0125 Insufficient Coolant Temp for Closed Loop Fuel Control Sets in the PCM  when the CHT  sensor or the ECT  sensor has not achieved the required temperature level to enter closed loop operating conditions within a specified amount of time after starting the engine.
P0128 Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) Sets in the PCM  when the thermostat monitor has not achieved the required engine operating temperature within a specified amount of time after starting the engine.