LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Supplemental Restraint System) >> Removal and Installation >> Front Impact Severity Sensor >> Installation

Front Impact Severity Sensor: Installation

WARNING: This page is about a different car, the 2014 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure the radiator support and front impact severity sensor mating surfaces are clean and free of foreign material before installation.

    To install, reverse the removal procedure.

  2. If the SRS  was depowered, repower the SRS  .

    Refer to: SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  .

scientia non olet · About LEMON Manuals