LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Cruise Control System) >> Removal And Installation >> Cruise Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. NOTE: Carefully grasp and pull the edges to remove the steering wheel spoke finish panels.

    If equipped, remove the steering wheel spoke finish panels.

  3. NOTE: Using a small, flat-bladed screwdriver, gently pry up the cruise control switches from the steering wheel, beginning at the outer edge. Use care not to damage the steering wheel.

    Remove the cruise control switches.

    • Disconnect the electrical connector(s).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals