LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Removal

Stoplamp Switch: Removal

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this service information, refer to SAFETY WARNINGS . Failure to follow this instruction may result in serious personal injury.
  1. Remove the steering column cover trim panel and the steering column cover. REFER to INSTRUMENT PANEL - EXPLODED VIEW .
  2. NOTE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

    Disconnect the stoplamp switch electrical connector and rotate the stoplamp switch clockwise approximately one-eighth turn to remove the stoplamp switch.

scientia non olet · About LEMON Manuals