LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Installation

Stoplamp Switch: Installation

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

    Install the stoplamp switch and rotate counter clockwise approximately one-eighth turn and connect the stoplamp electrical connector.

  2. Install the steering column cover and steering column cover trim panel. REFER to INSTRUMENT PANEL - EXPLODED VIEW .
scientia non olet · About LEMON Manuals