LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Exterior Lighting System) >> Removal And Installation >> Headlamp Assembly >> Installation

Headlamp Assembly: Installation

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the headlamp assembly.
    1. Connect the electrical connectors and install the headlamp assembly.
    2. Install the 2 headlamp assembly bolts.
      • Tighten to 3 Nm (27 lb-in).
    3. Install the front fender-to-headlamp assembly bolt.
      • Tighten to 7 Nm (62 lb-in).
  2. Install the front bumper cover. REFER to BUMPER COVER - FRONT .
scientia non olet · About LEMON Manuals