LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 354 (HVAC - Climate Control System - DATC) >> Description And Operation >> Climate Control - DATC >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2014 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
MODULE NETWORK INPUT MESSAGES - FCIM

Broadcast Message Originating Module Message Purpose
Climate Control touchscreen and voice requests APIM  This message contains both the climate control system voice commands as well as all climate control system touch screen inputs.
Climate control status HVAC  This message contains the HVAC  mode status for the mode indicators.
MODULE NETWORK INPUT MESSAGES - IPC

Broadcast Message Originating Module Message Purpose
Climate control requests (gateway) FCIM  This message contains the HVAC  temperature setting for the IPC  display.
Climate control seat requests FCIM  This message contains the HVAC  blower motor setting for the IPC  display.
Climate control information status FCIM  This message contains the HVAC  temperature and blower motor setting from the touch screen controls for the IPC  display.
MODULE NETWORK INPUT MESSAGES - APIM

Broadcast Message Originating Module Message Purpose
Driver temperature setting FCIM  This message contains the HVAC  temperature setting for the touch screen display.
Front blower request FCIM  This message contains the HVAC  blower motor setting for the touch screen display.
Driver temperature units HVAC  This message contains the HVAC  driver temperature setting.
Passenger temperature units HVAC  This message contains the HVAC  passenger temperature setting.
Front fan bar display HVAC  This message contains the HVAC  blower motor setting.
MODULE NETWORK INPUT MESSAGES - PCM

Broadcast Message Originating Module Message Purpose
A/C request (gateway) HVAC  module This message requests the A/C compressor clutch to be engaged.
MODULE NETWORK INPUT MESSAGES - HVAC MODULE

Broadcast Message Originating Module Message Purpose
Climate control requests (gateway) FCIM  This message contains all climate control system controls requests except blower motor speed.
Climate control seat requests (gateway) FCIM  This message contains the climate control system controls request for blower motor speed.
Climate control information status FCIM  This message contains the climate control system controls request from the MyTemp button.
Remote start status BCM  This message contains the climate control system controls request for remote start.
A/C clutch status PCM  This message contains the A/C compressor clutch status.
Ambient air temperature PCM  This message contains raw value from the ambient temperature sensor.