LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Removal And Installation >> Hydraulic Control Unit (HCU) >> Installation

Hydraulic Control Unit (HCU): Installation

  1. To install, reverse the removal procedure.
  2. If a new Anti-Lock Brake System (ABS) module was installed, download the module configuration information from the scan tool. Refer to MODULE CONFIGURATION .
  3. If a new Anti-Lock Brake System (ABS) module and/or a new HCU was installed, carry out the IVD Initialization sequence following the scan tool directions.
  4. Bleed the brake system. For additional information, refer to BRAKE SYSTEM - GENERAL INFORMATION .
scientia non olet · About LEMON Manuals