LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> C-Max Energi >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Charging And Controls >> Removal and Installation >> Fuel Pump Driver Module (FPDM) >> Installation

Fuel Pump Driver Module (FPDM): Installation

  1. G08408238Courtesy of FORD MOTOR CO.
  2. Peel off the protective backing from the new FPDM  .
    G08408239Courtesy of FORD MOTOR CO.
  3. NOTE: Locate the FPDM  over the 2 studs (for location purposes only) and press down firmly.
    G08408240Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals