LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> C-Max Energi >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Passive Anti-Theft System >> Description and Operation >> Passive Anti-Theft System (PATS) - System Operation and Component Description >> System Operation >> BCM Parameter Identification (PID) Chart

BCM Parameter Identification (PID) Chart

Acronym Name Description
KEYS_PROGMD PATS number of ignition key codes supported Number of keys currently programmed into the BCM  (If unlimited key mode is enabled, this Parameter Identification (PID) only reads 2 regardless of how many keys are programmed).
MIN_KEYS_RQD Minimum number of keys required Minimum number of programmed keys required. This Parameter Identification (PID) always reads 2.
PCM_ID PCM ID status stored Indicates if there is a SOBDMC  identification currently stored in the BCM. Must read stored for the engine to start.
PCM_VERIFY PCM verify OK Indicates if the SOBDMC  identification received by the BCM  matches the SOBDMC  identification stored in the BCM  memory. Must read yes to enable the motor.
START_ENABLD Vehicle enable status Indicates if the PATS  allows the motor to apply torque. Must read enabled for the vehicle to be driven.
scientia non olet · About LEMON Manuals