LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Transit Connect Base, Van Cargo >> Repair and Diagnosis >> Steering >> Steering Column >> Removal And Installation >> Steering Column Shroud >> Removal and Installation

Removal and Installation

  1. If equipped, remove the steering wheel audio control switch. For additional information, refer to INFORMATION AND ENTERTAINMENT SYSTEMS .
  2. Release the steering column lever and move the steering column to the full outward and upward position.
  3. Remove the 2 lower steering column shroud screws.
    Fig 1: Locating Lower Steering Column Shroud Screws
    G06256324Courtesy of FORD MOTOR CO.
  4. Remove the lower steering column shroud.
  5. Remove the upper steering column shroud.
    • Lift upward on the upper steering column extension cover.
      Fig 2: Lifting Upward On Upper Steering Column Extension Cover
      G06256325Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.
    • If installing a new upper steering column shroud, separate the shroud from the upper steering column extension cover by releasing the tabs at the locations shown in illustration.
      Fig 3: Locating Upper Steering Column Shroud And Tabs
      G06256326Courtesy of FORD MOTOR CO.