Removal And Installation

WARNING: This page is about a different car, the 2015 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row in this service information.

1.

Remove the center occupant head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve in this service information.

2.

Detach the backrest cover retainer at the bottom, at the inboard side and open the backrest cover.

Courtesy of FORD MOTOR COMPANY

3.

Detach the armrest cover retainers from the hard back panel.

Courtesy of FORD MOTOR COMPANY

4.

Remove the armrest assembly.
1. 1.
  
  Separate the hook-and-loop strip at the bottom and pull the backrest cover out at the top.
1. 2.
  
  Pull the 3 backrest cover retainers out from between the hardback panel and backrest frame.
1. 3.
  
  Remove the 3 armrest-to-backrest frame bolts.
  - To install, tighten to 20 Nm (177 lb-in).
1. 4.
  
  Detach the 2 retaining clips, pull out at the front and remove the armrest assembly.

Courtesy of FORD MOTOR COMPANY

5.

To install, reverse the removal procedure.