LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case - Power Transfer Unit) >> In-Vehicle Repair >> Cover Seal >> Installation

Cover Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Assemble the Driver Handle, the Halfshaft Oil Seal Installer and the Shaft Bearing Cup Installer as shown in illustration.
    Fig 1: Assembling Driver Handle, Halfshaft Oil Seal Installer And Shaft Bearing Cup Installer
    G06064379Courtesy of FORD MOTOR CO.
  2. Using the Driver Handle, the Halfshaft Oil Seal Installer and the Shaft Bearing Cup Installer, install the cover seal in the PTU.
    Fig 2: Installing Cover Seal In PTU Using Driver Handle, Halfshaft Oil Seal Installer And Shaft Bearing Cup Installer
    G06064380Courtesy of FORD MOTOR CO.
  3. Install the intermediate shaft seal and deflector. Refer to INTERMEDIATE SHAFT SEAL AND DEFLECTOR .
  4. Fill the PTU as necessary. Refer to POWER TRANSFER UNIT (PTU) DRAINING AND FILLING .
scientia non olet · About LEMON Manuals