Valve Seat Inspection

WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

Valve and Seat Refacing Measurements

NOTE: Refer to the appropriate Engine article for the specification.

NOTE: After grinding valves or valve seats, check valve clearance.

1.

Check the valve head and seat.
- Check valve angles.
- Check margin width.
- Be sure margin width is within specification.

Courtesy of FORD MOTOR COMPANY

2.

Inspect for abnormalities on the valve face and seat. Install a new cylinder head assembly if abnormalities are found.