Removal and Installation
WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
3.7L shown in illustration, 5.0L (4V) and 5.4L (4V) similar.
3.7L or 5.4L (4V) vehicles
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Remove the lower radiator splash shield.
All vehicles
- Detach the ambient temperature sensor electrical connector pin-type retainer.
- Disconnect the ambient temperature sensor electrical connector and remove the ambient temperature sensor.
- To install, reverse the removal procedure.
NOTE:
For 5.0L vehicles, the ambient temperature sensor can be accessed through the airflow opening in the front bumper cover.