Power Point: Removal

WARNING: This page is about a different car, the 2012 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Power point cover may differ depending on location.

Open the power point cover.
Install the Power Point Socket Remover in one of the power point socket slots.

Fig 1: Installing Power Point Socket Remover In Power Point Socket Slots
Position the Power Point Socket Remover so that it engages in the adjacent slot.

Fig 2: Engaging Adjacent Slot Using Power Point Socket Remover
Using the Power Point Socket Remover, pull the power point socket out of the retainer.

Fig 3: Pulling Power Point Socket Out Of Retainer Using Power Point Socket Remover
Disconnect the electrical connector.