Component Tests: Cap
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the pressure relief cap and seals for damage or deterioration. Install a new pressure relief cap if necessary.
- Fit the pressure relief cap to the Radiator/Heater Core Pressure Tester Kit using the correct adapter.
- Slowly pump the pressure tester until the pressure gauge stops increasing and note the highest pressure reading. Release the pressure and repeat the test. Install a new pressure relief cap if the pressure is not within specification. Refer to SPECIFICATIONS .
NOTE:
If the plunger of the pressure tester is depressed too fast, an incorrect pressure reading will result.