LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1190 (Manual Transmission) >> Disassembly And Assembly Of Subassemblies >> Differential - 4WD >> Assembly

Differential - 4WD: Assembly

WARNING: This page is about a different car, the 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a suitable press, install a new differential side bearing. Only use the inner bearing race to install.
    2. Fig 1: Installing Differential Side Bearing
    GF0025404Courtesy of FORD MOTOR CO.
  2. Install the VSS drive gear.
  3. Install the spacer.
  4. Using a suitable press, install a new differential side bearing. Only use the inner bearing race to install.
    5. Fig 2: Installing Differential Side Bearing
    GF0025405Courtesy of FORD MOTOR CO.
  5. Install the final drive gear.
  6. Install the 10 final drive gear bolts.
    • Tighten in the sequence shown to 120 Nm (89 lb-ft).
    7. Fig 3: Final Drive Gear Bolts Torque Sequence
    GF0025406Courtesy of FORD MOTOR CO.
  7. Install the reduction gear.
  8. Install the 10 reduction gear bolts.
    • Tighten in the sequence shown to 96 Nm (71 lb-ft).
    9. Fig 4: Reduction Gear Bolts Torque Sequence
    GF0025408Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals