LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Taurus Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 893 (Acceleration Control System) >> Removal And Installation >> Accelerator Pedal >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator cable from the accelerator pedal and shaft.
    Fig 1: Disconnecting Accelerator Cable From Accelerator Pedal Shaft
    GF0010753Courtesy of FORD MOTOR CO.
  2. Remove the accelerator pedal pivot bolt and the accelerator pedal.
    • To install, tighten to 9 Nm (80 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals