Transaxle Case: Assembly
WARNING: This page is about a different car, the 2016 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Special Tool(s): Handle 205-153 (T80T-4000-W), Oil Dam Seal Installer 307-583
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Inspect the transfer shaft fluid dam to be sure it is seated evenly into the transmission case. Visual check.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Special Tool(s): Bearing Cup Installer 307-576 General Equipment: Shop Press
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Special Tools(s): Bearing Cup Installer 307-689
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Special Tool(s): Bearing Cup Installer 307-689, Installer, Transfer Gear Bearing 307-541, Drawbar 204-029
 Courtesy of FORD MOTOR COMPANY
|
- 7.
 Courtesy of FORD MOTOR COMPANY
|
- 8.
 Courtesy of FORD MOTOR COMPANY
|
- 9.
 Courtesy of FORD MOTOR COMPANY
|
- 10.
- Tighten to 12 Nm (106 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
- 11.
Remove the torque converter housing differential and transfer shaft bearing races to select a new differential or transfer shaft shim. Refer to Torque Converter Housing .