Seat Backrest Heater Mat Rear: Installation

WARNING: This page is about a different car, the 2015 Lincoln MKS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Always install a new backrest foam pad and backrest heater mats together.

1.

Install new backrest heater mats onto the new backrest foam pad.
1. 1.
  
  Remove the paper strips from the cushion heater mat and adhere to the cushion foam pad, laying it flat with no wrinkles.
1. 2.
  
  Route the backrest heater mat wire harness and electrical connector through the backrest foam pad to the other side.

Courtesy of FORD MOTOR COMPANY

2.

Position the backrest frame into the backrest foam pad and install hog rings.

3.

Connect the 2 backrest heater mat electrical connectors.

4.

Install the seat backrest cover. For additional information, refer to Seat Backrest Cover - Rear .