LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 728 (Climate Control System - General Information) >> Removal And Installation >> Condenser >> Installation

Removal And Installation: Condenser: Installation

WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: Only use the specified material to lubricate the seals.

    Install new O-ring seals.

    Material

    : Motorcraft ® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

  1. 3.

    Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to: Refrigerant Oil Adding .
scientia non olet · About LEMON Manuals