LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Engine Controls - Acceleration Control System) >> Removal And Installation >> Accelerator Pedal - Adjustable >> Removal

Accelerator Pedal - Adjustable: Removal

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. If possible, adjust the pedals to the full forward (away from driver) position.
  2. NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connector.

    Disconnect the Accelerator Pedal Position (APP) sensor electrical connector.

  3. Disconnect the accelerator pedal-to-brake pedal cable from the brake pedal.
  4. Remove the 3 bolts and the accelerator pedal assembly.
scientia non olet · About LEMON Manuals