LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Engine Controls - Acceleration Control System) >> Removal And Installation >> Accelerator Pedal - Adjustable >> Installation

Accelerator Pedal - Adjustable: Installation

WARNING: This page is about a different car, the 2014 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the accelerator pedal assembly and the 3 bolts.
    • Tighten to 25 Nm (18 lb-ft).
  2. Connect the accelerator pedal-to-brake pedal cable to the brake pedal.
  3. Connect the APP  sensor electrical connector.
  4. Carry out the adjustable pedal indexing procedure. For additional information, refer to HYDRAULIC BRAKE ACTUATION .
scientia non olet · About LEMON Manuals