LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Acceleration Control System >> Diagnosis And Testing >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

    NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connectors.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 3 nuts and the accelerator pedal and sensor assembly.
scientia non olet · About LEMON Manuals