LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Removal And Installation >> Muffler >> Installation

Removal And Installation: Muffler: Installation

  1. Position a new ball clamp on the muffler assembly.
    2. NOTE: Lubricate the muffler assembly isolators with soapy water to ease in installation.
  2. Slide the muffler assembly 2 hooks into the front isolator and then attach the rear isolator.
  3. Tighten the new intermediate pipe-to-muffler inlet ball clamp.
    • Tighten to 30 Nm (22 lb-ft).
scientia non olet · About LEMON Manuals