LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Fusion S, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (6F35) >> In-Vehicle Repair >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

  1. Inspect the O-ring seal on the transaxle filler tube for damage and install a new O-ring if needed. Lubricate the O-ring seal with clean automatic transmission fluid.
    Fig 1: Locating Transaxle Filler Tube O-Ring Seal
    G08023088Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals