Inspection and Verification
WARNING: This page is about a different variant/trim than selected.
- Verify the customer concern by operating the system.
- Visually inspect for obvious signs of mechanical or electrical damage.
- If an obvious cause for an observed or reported concern is found, correct the cause before proceeding to the next step.
- If the concern is not visually evident, verify the symptom. GO to SYMPTOM CHART .VISUAL INSPECTION CHART
Mechanical Electrical - Transmission selector lever cable
- Manual control lever
- Selector lever or selector lever knob
- Smart Junction Box (SJB) fuse 5 (10A)
- Connections
- Wiring harness
- Brake Pedal Position (BPP) switch
- Brake Shift Interlock Actuator (BSIA)
DTC CHARTDTC Component Description Condition Symptom Action B2572 Brake Shift Interlock Brake Shift Interlock Output Circuit Failure The associated circuitry connected to the Smart Junction Box (SJB) or fuse, or the SJB itself may have an issue causing a brake shift interlock concern. Brake shift interlock is inoperative or does not operate correctly. GO to PINPOINT TEST A .