Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Interior lamps Circuit | 4 and 2 | 2nd detent up | Closed circuit |
| 2nd detent down | Closed circuit | ||
| Rest position | Open circuit | ||
| Illumination dimmer up | 4 and 7 | 1st detent up | Closed circuit |
| Rest position | Open circuit | ||
| Illumination dimmer down | 4 and 3 | 1st detent down | Closed circuit |
| Rest position | Open circuit |