LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Fusion S, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And Stability Control >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

  1. Remove the steering column shroud. For additional information, refer to STEERING COLUMN .
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Using the scan tool, calibrate the new steering wheel rotation sensor to the ABS module. Follow the scan tool instructions for Interactive Vehicle Dynamics (IVD) Initialization.
scientia non olet · About LEMON Manuals