LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Fusion Hybrid >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (ECVT) >> In-Vehicle Repair >> Transmission Range (TR) Sensor >> Removal

Transmission Range (TR) Sensor: Removal

  1. Remove the 7 screws and the underbody cover.
    Fig 1: View Of Underbody Cover Fasteners
    G06257240Courtesy of FORD MOTOR CO.
  2. Disconnect the selector lever cable end from the manual control lever.
    Fig 2: Locating Selector Lever Cable End
    G06275504Courtesy of FORD MOTOR CO.
  3. Disconnect the Transmission Range (TR) sensor electrical connector.
    Fig 3: Locating Transmission Range Sensor Electrical Connector
    G06275505Courtesy of FORD MOTOR CO.
  4. Remove the nut and the manual lever.
    Fig 4: Locating Manual Control Lever Mounting Nut
    G06275509Courtesy of FORD MOTOR CO.
  5. Remove the 2 bolts, slide the TR sensor off of the manual shaft and remove the TR sensor.
    Fig 5: Locating TR Sensor Mounting Bolts
    G07786166Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals