LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2012
>>
Focus Titanium, 4D Hatchback, Standard Trans, Gas
>>
Repair and Diagnosis
>>
Electrical
>>
Starter
>>
Starting System - 2.0L DURATEC-He
Starting System - 2.0L DURATEC-He
Expand All (for easy ctrl-f)
Collapse All
Specifications
Description and Operation
Starting System - Overview
Starting System - without Push Button Start
Starting System - with Push Button Start
Starting System - System Operation and Component Description
System Operation
System Diagram
Network Message Chart
Starting System
Component Description
Integrated Keyhead Transmitter (IKT)
Passive Anti-Theft System (PATS) Transceiver
Ignition Switch
Powertrain Control Module (PCM)
Body Control Module (BCM)
Intelligent Access (IA) Key
Ignition Switch - Push Button Start
Remote Function Actuator (RFA) Module
Diagnosis and Testing
Starting System
DTC Charts
Symptom Chart(s)
Symptom Chart: Starting System
Pinpoint Test(s)
Engine Does Not Crank (Without Push Button Start)
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test A : Engine Does Not Crank (Without Push Button Start)
Engine Does Not Crank (With Push Button Start)
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test B : Engine Does Not Crank (With Push Button Start)
Unusual Starter Noise
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test C : Unusual Starter Noise
P0615
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test D : P0615
P2531 or P2532
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test E : P2531 Or P2532
P2534 or P2535
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Pinpoint Test F : P2534 Or P2535
B10E5:11 or B10E5:15
Notes
Normal Operation and Fault Conditions
Possible Sources
Pinpoint Test G : B10E5:11 Or B10E5:15
Component Test(s)
Starter Motor - Positive Circuit Test
Starter Motor - Ground Circuit Test
General Procedures
Starter Motor Drive Gear and Flywheel Ring Gear Inspection
Removal and Installation
Starter Motor
Removal
Installation