LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Focus Titanium, 4D Hatchback, Automatic DCT Trans, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Climate Control System -- Electric) >> General Procedures >> Fluorescent Dye Leak Detection >> Activation

Fluorescent Dye Leak Detection: Activation

WARNING: This page is about a different variant/trim than selected.
  1. Refer to: CLIMATE CONTROL SYSTEM HEALTH AND SAFETY PRECAUTIONS ).
  2. Locate the leaks. Check all components, fittings and lines of the A/C  system for leaks. General Equipment: UV Leak Detector
  3. After the leak is found and rectified, remove any traces of dye with a general purpose solvent.
  4. Check the repair by operating the system for some minutes and inspecting with the UV lamp again.
scientia non olet · About LEMON Manuals