LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Flex SE >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Removal And Installation >> Occupant Classification System Module (OCSM) - Power Seat Track >> Removal

Occupant Classification System Module (OCSM) - Power Seat Track: Removal

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.
NOTE: TheSupplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
  1. Depower the SRS. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering  in the General Procedures portion of this section.
  2. Disconnect the Occupant Classification System Module (OCSM) electrical connector.
  3. Remove the 2 screws and OCSM.
  4. To install, reverse the removal procedure.
  5. Repower the SRS. Do not  prove out the SRS at this time. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering  in the General Procedures portion of this section.
  6. Carry out the Occupant Classification Sensor (OCS) System Reset procedure. For additional information, refer to Occupant Classification Sensor (OCS) System Reset  in the General Procedures portion of this section.
scientia non olet · About LEMON Manuals