LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Flex SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the SPECIFICATIONS for 3.5L & SPECIFICATIONS for 3.5L GDTI for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing Using Telescoping Gauge
    G08042355Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge With Micrometer
    G08042356Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals