LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Flex SE >> Repair and Diagnosis >> Body & Frame >> Seat System - Seats >> Removal And Installation >> Memory Set Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Release the 4 tabs (2 shown in illustration) and remove the memory SET switch.
    Fig 1: Location of Memory Set Switch
    G08048184Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals