LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Fiesta SEL, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Anti-Lock Brake System And Stability Control) >> Removal And Installation >> Wheel Speed Sensor Ring - Front >> Removal

Wheel Speed Sensor Ring - Front: Removal

WARNING: This page is about a different car, the 2013 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front hub and bearing assembly. For additional information, refer to FRONT SUSPENSION .
  2. Using the Pinion Bearing Cone Remover and the Wheel Speed Sensor Ring Installer, remove the front wheel speed sensor ring from the front hub.
    Fig 1: Removing Front Wheel Speed Sensor Ring From Front Hub Using Special Tools
    G06403281Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals