LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine System - General Information) >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the appropriate Engine Mechanical article for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing Using Telescoping Gauge
    G06064087Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Measuring Telescoping Gauge Reading Using Micrometer
    G06064088Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals