Pinpoint Test

1. Inspect the starter mounting bolts for looseness.

Is the starter motor mounted correctly? 

• Yes: GO to 2  .
• No: INSTALL the starter motor correctly. REFER to Starter Motor - 2.0L GTDI  or Starter Motor - 3.5L Ti-VCT .

1. Ignition OFF.
2. Connect a remote starter switch between the starter solenoid C197A-1 ("B" terminal) and C197B-1 ("S" terminal).
3. Engage the starter and verify the noise is due to starter operation.

Is the noise due to the starter engagement? 

• Yes: REFER to Starter Motor Drive Gear and Flywheel Ring Gear Inspection .
• No: REFER to SYMPTOM CHART: NVH to continue diagnosis.