LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems - Without Intelligent Access >> General Procedures >> Autolock Programming >> Programming the Autolock Feature Using the Message Center

Programming the Autolock Feature Using the Message Center

  1. With all the vehicle doors closed, turn the ignition key from the OFF to the ON position.
  2. NOTE: Refer to the Owner's Literature for a complete list of the message center menus.

    Access the locks menu within the setup menu in the message center.

  3. Select autolock and use the left and right arrows to enable or disable the feature.
scientia non olet · About LEMON Manuals