LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Expedition RWD >> Repair and Diagnosis >> Steering >> Steering Column >> Removal And Installation >> Steering Column Motor >> Removal and Installation

Removal and Installation

  1. Remove the steering column. For additional information, refer to Steering Column .
  2. Remove the screw and the ignition switch.
    • To install, tighten to 5 Nm (44 lb-in).
  3. Remove the roll pin from the steering column motor.
  4. Remove the bolt and the motor.
    • To install, tighten to 25 Nm (18 lb-ft).
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals