LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Expedition RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Removal And Installation >> Starter Motor >> Removal

Starter Motor: Removal

WARNING: Always disconnect the battery ground cable at the battery before disconnecting the starter motor battery terminal lead. If a tool is shorted at the starter motor battery terminal, the tool can quickly heat enough to cause a skin burn. Failure to follow this instruction may result in serious personal injury.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  3. Remove the starter terminal cover and remove the nut and the solenoid S-terminal electrical connection.
  4. Remove the nut and the solenoid B-terminal electrical connection.
  5. Remove the nut and the starter battery ground cable from the stud.
  6. Remove the 2 bolts, the stud bolt and the starter motor.
scientia non olet · About LEMON Manuals