Engine Cooling System: Specifications
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity | ||
|---|---|---|---|---|
| Motorcraft® Metal Surface Prep ZC-31-A |
- | - | ||
| Motorcraft® Premium Cooling System Flush VC-1 |
ESR-M14P7-A | - | ||
| Motorcraft® Silicone Gasket Remover ZC-30 |
- | - | ||
| Motorcraft® Specialty Orange Engine Coolant VC-3-B (US); CVC-3-B (Canada); or equivalent |
WSS-M97B44-D | Base radiator without aux. rear heat - 15.5L (16.4 qt)a Base radiator with aux. rear heat - 18L (19 qt)(1) Heavy duty trailer tow radiator without aux. rear heat - 16L (16.9 qt)(1) Heavy duty trailer tow radiator with aux. rear heat - 18.5L (19.5 qt)(1) | ||
|
||||
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Pressure Tests | |
| Complete cooling system maximum pressure | 110 kPa (16 psi) |
| Pressure relief cap | 110 kPa (16 psi) |
| Radiator (out of vehicle) | 138 kPa (20 psi) |
| Thermostat Opening Temperatures | |
| Starts to open | 86.7-90.6°C (188-195°F) |
| Fully open | 100°C (212°F) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C condenser fitting nut and bolt | 15 | - | 133 |
| Battery Junction Box (BJB) bolts | 10 | - | 89 |
| Battery power cable nut | 10 | - | 89 |
| Block heater retaining screw | 2 | - | 18 |
| Coolant expansion tank bolts | 15 | - | 133 |
| Coolant pump bolts | 25 | 18 | - |
| Coolant pump pulley bolts | 25 | 18 | - |
| Cooling fan motor and shroud bolts | 7 | - | 62 |
| Cooling module bolts | 25 | 18 | - |
| Hood latch assembly bolts | 25 | 18 | - |
| Horn assembly bolt | 10 | - | 89 |
| Power Distribution Box (PDB) support bracket bolts | 10 | - | 89 |
| Power steering fluid reservoir stud bolt | 11 | - | 97 |
| Radiator assembly-to-radiator support bolts | 15 | - | 133 |
| Thermostat housing bolts | 10 | - | 89 |