LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Escape XLS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Power Transfer Unit) >> In-Vehicle Repair >> Output Shaft Seal >> Installation

Output Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the PTO Drive Gear Outer Oil Seal Installer, install the PTU output shaft oil seal.
    Fig 1: Installing PTU Output Shaft Oil Seal
    G06098384Courtesy of FORD MOTOR CO.
  2. Install the deflector.
  3. Install the PTU output shaft flange. For additional information, refer to OUTPUT FLANGE .
scientia non olet · About LEMON Manuals