LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Escape XLS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission (6F35)) >> Disassembly And Assembly Of Subassemblies >> Clutch Support Tower >> Disassembly

Clutch Support Tower: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Using a suitable tool, remove and discard the 4 Teflon® seals.
    Fig 1: Removing Teflon® Seals
    G06097460Courtesy of FORD MOTOR CO.
  2. Clean and inspect the clutch support tower for damage. Install a new clutch support tower if damaged.
    Fig 2: Identifying Clutch Support Tower
    G06097461Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals