Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to Test | Connect self-powered test light or ohm-meter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Run/Start power circuit | 4 and 1 | Off Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/ACC power circuit | 4 and 6 | Off Lock | Open circuit |
| Accessory | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Key reminder circuit | 4 and 5 | Key In | Closed circuit |
| Key Out | Open circuit | ||
| Start power circuit | 4 and 7 | Off Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Open circuit | ||
| Start | Closed circuit |